(Only for V2 versions) I was uploading firmware on my v2 pois with radio and now poi is off and looks dead.

Here is the link https://yadi.sk/d/2VRiewQ83SdY6F/V2

You need V2-2.1.4-firmware160HD(client’s model)

To flash V2 devices using the Pixel Poi Utility, you need: 

1. Rename the file with the firmware to "cr_iPixel.hex" and put it next to "Download.exe". 

2. Connect the device to the PC and make sure that it is defined as "COM4". If this is not the case, you need to change the device port to "COM4" and reconnect the device to the PC. 

3. Run "Download.exe" and wait for the firmware to finish.

Vídeos útiles:
Opción de control inalámbrico
Crash test de poi de píxeles Ignis Pixel
Cómo cargar imágenes a Ignis Pixel
¿No ha encontrado una respuesta a su pregunta?
Pregúntenos aquí
Seleccione la vía preferida de comunicación
Terms and conditions Banking details
Departamento de atención al cliente
pixel@ignispixel.com +7 977 869 25 93 Solicitar una llamada